System Modularity
When smoke-based protection is discussed, it is typically understood as a solution designed to secure a single room. However, we are the first in the world to offer a solution that protects an entire facility- using a single, unified system. How?
We have developed a modular architecture consisting of a central (master) unit and additional networked sub or filler systems. This approach delivers superior flexibility, adaptability, and scalability, allowing individual modules to be independently developed, upgraded, or combined to create multiple configurations and enhance existing security infrastructures.
SUB System
Master System
SUB System
SUB System
System Architecture
From the very beginning, when designing the system architecture, our objective was to create a solution composed of multiple networked units capable of protecting an entire facility.
A second, equally important requirement was the elimination of false alarms. For this reason, the system is activated exclusively when an intruder physically enters a protected area. This means that even if multiple units are installed within the same facility, only the unit that actually detects the intruder will be triggered. In practice, intruders almost never reach a second unit. Our dense smoke barrier is highly effective, creating mild irritation to the eyes and throat, making it impossible to remain in the protected area for more than a few seconds.
SUB System
A supplementary system that activates only if an intruder breaches the first barrier and enters the protected area.
Master System
SUB System
The supplementary system can be configured with 1, 2, 3, or 4 cartridges, programmed to activate as many cartridges as needed and exactly when required.
SUB System
The supplementary system leverages the full intelligence of the master system, which continuously monitors signals from the alarm system.
System Efficiency Philosophy
The objective of traditional systems is to fill a room 100% with a smoke curtain and reduce visibility. In practice, such systems suffer from numerous issues and can be easily bypassed or falsely triggered. Our smoke barrier, within just 2 to 3 seconds, forces intruders out of the protected area and immediately stops the theft.
Without the need to fill the entire room with a smoke curtain…
It is impossible to remain in the room for more than 2 to 3 seconds.
Up to 24 hours of uninterrupted operation during a power outage
The entire system is designed to operate independently of mains (AC) power. The core system runs on 12V DC supplied by the alarm panel and its backup battery. The ignition system, developed in-house, requires only 5V DC. Because both subsystems rely solely on low-voltage DC power from the alarm system’s battery, a loss of mains power has no impact on operation.
In real-world conditions, the system remains fully functional for up to 24 hours after a complete mains power failure, subject to the capacity and condition of the alarm system’s backup battery.
Discreet, easy to integrate, and cost-effective
Each of our systems is identical-compact, lightweight, discreet, and in 99% of cases can be installed within any interior design without aesthetic or physical interference.
With traditional systems, you would pay the full price for five identical units. In our case, SUB or FILLER systems are significantly more affordable than the master unit, resulting in a total system cost that is nearly twice as cost-effective compared to traditional solutions.
From the very beginning, Enforcer Systems has been dedicated to protecting entire facilities with multiple entrances and potential weak points-not just a single room.