E200CPM/MCU
The Enforcer E200 CPM range by Phantom Fog is built for focused protected zones that need hard-wired, fast-response active defense. When a break-in is detected, the system deploys a dense and impenetrable smoke screen that immediately disrupts visibility and drives intruders out of the space.
System Characteristics
With a minimalist and elegant appearance, compact dimensions, and high performance, Enforcer CPM by Phantom Fog integrates cleanly into demanding interiors while remaining discreet. The result is powerful protection against armed burglary and robbery without visual clutter.
System Installation
Enforcer CPM by Phantom Fog was designed first as a flush, built-in ceiling system for both functional and aesthetic reasons. With the hardware hidden, the unit stays protected from accidental or intentional physical damage. Full installation and commissioning takes less than 30 minutes, while cartridge replacement takes less than 5 minutes.
What if the conditions do not allow installation of the system in the ceiling?
When built-in mounting is not practical, housing accessories make surface installation simple and secure for virtually any substrate.
Strong and durable metal
housing
15.2 in × 6.5 in × 6.0 in
6.2 - 7.7 lb
Status lights:
Green - System has power
Red - Activation signal
Blue - Armed and ready
Amber - Service required
Brackets attach the
system to the ceiling and
keep it fixed in place
Most of the system hidden
inside the ceiling
Visible cover, flush with the ceiling
System Characteristics
With a minimalist and elegant appearance, compact dimensions, and high performance, Enforcer CPM by Phantom Fog integrates cleanly into demanding interiors while remaining discreet. The result is powerful protection against armed burglary and robbery without visual clutter.
Strong and durable metal
housing
15.2 in × 6.5 in × 6.0 in
6.2 - 7.7 lb
Status lights:
Green - System has power
Red - Activation signal
Blue - Armed and ready
Amber - Service required
System Installation
Enforcer CPM by Phantom Fog was designed first as a flush, built-in ceiling system for both functional and aesthetic reasons. With the hardware hidden, the unit stays protected from accidental or intentional physical damage. Full installation and commissioning takes less than 30 minutes, while cartridge replacement takes less than 5 minutes.
Brackets attach the
system to the ceiling and
keep it fixed in place
Most of the system hidden
inside the ceiling
Visible cover, flush with the ceiling
What if the conditions do not allow installation of the system in the ceiling?
When built-in mounting is not practical, housing accessories make surface installation simple and secure for virtually any substrate.
Compatible with all alarm brands
Up to 12 hours of operation on the backup battery of your alarm system after a power outage
Panic button and remote activation
Everyday image of facilities and powerlessness of control rooms without Enforcer Systems by Phantom Fog
Ecosystem friendly, harmless to humans and animals
Complete invisibility of your property. Mild eye and throat irritation. Instantly evicts burglars.
What if we have several entrances or protected points, where one system is not enough?
Enforcer CPM by Phantom Fog is designed as a modular system: multiple coordinated CPM units for sites where one device is not enough. That makes it possible to protect facilities with multiple entrances or weak points, while keeping the intelligence in the master unit so additional systems activate only when an intruder actually passes into the protected path.
SUB System
An additional system that uses the intelligence of the Master system, in case burglars pass the first barrier.
Master System
A master system installed right at the front door, to prevent further intrusion and force burglars to retreat.
SUB System
Another additional system, which is activated only in case of motion detection in the protected area.
Passive Infrared Motion Sensor
The motion detector has a unique and durable spherical lens that enables double motion detection in a 360° radius from the installation site. It has a circuit for temperature detection and protection against photometric interference.
CPM Smoke Screen Technology
Innovative CPM smoke curtain technology, based on compressed sugar cane particles, housed in compact, specially designed cartridges. The result is a strong, dense, and impenetrable smoke screen with mild eye and throat irritation that immediately forces intruders to retreat.
Microcontroller Unit
To ensure the highest level of reliability and precision in logic processing, our engineering team applied a custom design approach to the creation of a special intelligent motherboard. The platform is built around an Arm Cortex M0+ 32-bit RISC processor running at up to 64 MHz on 12V power.
Product specifications
The E200 provides a compact system option for focused protected spaces that need stronger coverage without oversizing the deployment.
E200CPM/MCU
- Number of possible cartridges: 2
- Coverage capacity: up to 7,063 cu ft
- H 15.2 in / W 6.5 in / D 6.0 in
- Weight: 7.7 lb
- Possibility of reactivation: Yes
- Panic button: Yes
- Possibility of modularity: Sub, Filler
- Coverage with additional modules: 28,252 cu ft
- Required energy for operation: 12V
- Operation after power failure: 48h
- Smokescreen emission: 12 seconds
It only takes 5 seconds
to make them run away!
Otherwise, in less than 2 minutes
you could lose all valuable assets!